If you have any questions, please contact this email[email protected]

MORE PRODUCTS

  • Syscal Pro - IRIS Instruments

    The Syscal Pro is an all-in-one multinode resistivity and induce polarization sounding and profiling system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250 W internal transmitter which make it the more powerful system of the Syscal range.

  • Syscal Pro Switch - IRIS Instruments

    The Syscal Pro is an all-in-one multinode resistivity and induce polarization imaging system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250W, 2000Vpp internal transmitter which make it the more powerful system of the Syscal range. This system allows to perform up to 10 measurements at a time and its switching board allow to work ...

  • IRIS Instruments

    IRIS Instruments. We design and manufacture geophysical instruments. We train your technicians on proper measurement procedures, instruments use, data processing and interpretation

  • Syscal R2 - iris-instruments

    The Syscal R2 unit is a high-power system designed for DC electrical surveys applied to groundwater exploration, environmental studies, civil engineering, structural geology investigation and mineral exploration. This system uses an external DC source for the injection: - A 250W DCDC converter supplied by a 12V battery - A 1200W AC/DC converter supplied by a standard motor generator.

  • Resistivity checklist - IRIS Instruments

    Syscal switch (Tx and Rx fully charged) USB Cable with Syscal Plug Syscal user’s manual Safety instruction leaflet Softs CD IRIS Instruments with USB Driver RES2/3DINV Dongle Laptop with Electre Pro + Prosys installed Tools Security Pack Electrode Tester Battery Tester Switch Pro WiConnect device SD Card Reader Accessories

  • Syscal Pro Deep Marine - IRIS Instruments

    In fresh water environment, the standard Syscal Pro can be used for marine resistivity profiling. However, in highly conductive environment, a modified variant with higher current output is required. Thanks to its 10 reception channels, the Syscal Pro Deep Marine allows simultaneous collection of 10 resistivity data points corresponding to 10 depth levels.

  • Download page - IRIS Instruments

    The ELECTRE Pro software is a program allowing to create some 2D-3D-surface/boreholes sequences of measurement for IRIS Instruments SYSCAL Pro-Switch resistivity-meters. The ELECTRE Pro software allows to create automatically (accounting an estimated maximum investigation depth, user specified) or manually, some sequences of measurements with ...

  • Electrical Resistivity Syscal Pro Geophysical Land Products

    Syscal Pro from Iris Instruments. The Syscal Pro is an all-in-one multinode resistivity imaging system for environmental and engineering geophysical studies. It features internal switching board for 48 (Switch-48) up to 120 (Switch-120) electrodes, 10 of which can be addressed simultaneously depending on the array type being used, and an ...

  • Current: 2.5A
  • syscal pro IRIS Instruments

    IRIS Instruments is pleased to introduce its new . Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity pseudo section and data quality control – Data storage in Syscal and field computer

  • Syscal Pro Electrical Resistivity ... - Terramar Instruments

    The Syscal Pro is an all-in-one multinode resistivity and induce polarization sounding and profiling system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250 W internal transmitter which make it the more powerful system of the Syscal range.

  • Syscal Pro 2009 - Aarhus Universitet

    Tel: + 33 2 38 63 81 00 Fax: + 33 2 38 63 81 82 E-mail: [email protected] Web: iris-instruments SYSCAL Pro for continuous land survey SYSCAL Pro for river and sea survey DYNAMIC ACQUISITION for LAND SURVEYS • The SYSCAL Pro can be used with a specific cable pulled on the ground by a light vehicle, for a

  • Syscal R1 Plus - Terramar Instruments

    The SYSCAL R1 Plus resistivity meter is specifically designed for medium-depth exploration. It combines a power source, transmitter up to a 200W or 600V output voltage, and a 2 channels receiver in a single unit; its compactness makes it an effective tool for intensive resistivity surveys.

  • Syscal Junior Switch - IRIS Instruments

    The Syscal Junior is an all-purpose resistivity imaging and sounding system for environmental applications. The system can be supplied as a standard imaging system capable of recording two measurements simultaneously. The second recording channel significantly improves data acquisition time when the instrument is fitted with internal switching board for 24 (Switch-24) 48 (Switch-48) or 72 ...

  • IRIS INSTRUMENTS SYSCAL Pro SYSTEM

    IRIS INSTRUMENTS SYSCAL Pro resistivity IP equipment for SOUNDING, IMAGING SYSTEM and MONITORING 1D, 2D, 3D, 4D RESISTIVITY INVESTIGATIONS one single casing. It is supplied by a 12V battery. for characterizing underground structures: - ENVIRONMENT - CIVIL ENGINEERING - GROUNDWATER - ARCHAEOLOGY - MINING EXPLORATION

  • Syscal Monitoring Unit (SMU) Resistivity Land Geophysical ...

    Syscal Monitoring Unit (SMU) from Iris Instruments. The Syscal monitoring Unit is an automated system designed to allow the operator to remotely manage the recharging of the Syscal Pro transmitter and receiver batteries during a monitoring survey. The SMU connects the Rx and Tx batteries to an alternative source of power (solar panel, wind ...

  • Elrec Lite - IRIS Instruments

    The Elrec Lite G is a 2-channel hand held induced polarisation (IP) and Resistivity receiver mostly designed for mineral exploration. This low-weight device is particularly suited for sounding and profiling measurements where the operator must move from several hundreds of meters, carrying the receiver.

  • Battery tester - IRIS Instruments

    This Battery tester has been designed to estimate the autonomy of a battery for different loads. The role of the batteries is essential for all electrical prospecting surveys with a resistivity-meter and particularly in multi-electrode mode as it is sometimes necessary to inject huge amounts of current during several hours, by using continually external batteries.

  • Elrec 6 - IRIS Instruments

    The Elrec 6 is a 6-channel Induced Polarisation (IP) and Resistivity receiver designed to improve productivity when recording deep profiles and soundings. Beside the classical arithmetic and logarithmic modes, ELREC 6 also offers a Cole-Cole mode and ten fully programmable windows for a higher flexibility in the definition of the IP decay curve.

  • Electrode tester - IRIS Instruments

    This Electrode resistance tester has been designed to control the continuity of wires / electrodes.The connection of the circuit to be tested is done thanks to the two plugs. One button is used to read the value of the Ohmmeter, the result will be displayed in Kohm In case of open circuit, no values will be displayed. The module is supplied by standard cell.

  • VIP 10000 - IRIS Instruments

    The VIP series of Electrical transmitters are purposely designed for deep Induced Polarisation or Resistivity sounding investigations. The VIP 10000 internal microprocessor is capable of excellent current regulation in almost any load. Predominantly used as part of mineral exploration studies, the VIP series include three systems with different power specifications.

  • Electrical Resistivity Syscal R1 Plus Geophysical Land ...

    Syscal R1 (Image Courtesy of Iris Instruments) The SYSCAL R1 Plus resistivity meter, specifically designed for medium-depth exploration, can be used for civil engineering, groundwater and environmental projects, to solve problems such as depth-to-bedrock determination, localisation of weathered bedrock, clay-gravel determination, measurement of ...

  • Iris Instruments - Syscal R1 Plus 2 ch, 1200Vpp, 200W

    The SYSCAL R1 Plus resistivity meter is specifically designed for medium-depth exploration. It combines a power source, transmitter up to a 200W or 800Vpp output voltage, and a 2 channels receiver in a single unit; its compactness makes it an effective tool for intensive resistivity surveys.

  • IRIS Instruments We design and manufacture geophysical ...

    IRIS Instruments is pleased to introduce its new Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity pseudo section and data quality control

  • IRIS Instruments presentation in 2012 AGU Fall Meeting ...

    Oct 13, 2017  Applied Geophysics in the Global Marketplace II 2012 AGU Fall Meeting. ... IRIS Instruments presentation in 2012 AGU Fall Meeting ... Syscal Pro for soil contamination study by IRD.

  • Electrical Resistivity Syscal R1 Plus Geophysical Land ...

    Syscal R1 (Image Courtesy of Iris Instruments) The SYSCAL R1 Plus resistivity meter, specifically designed for medium-depth exploration, can be used for civil engineering, groundwater and environmental projects, to solve problems such as depth-to-bedrock determination, localisation of weathered bedrock, clay-gravel determination, measurement of ...

  • Iris Instruments - Syscal R1 Plus 2 ch, 1200Vpp, 200W

    The SYSCAL R1 Plus resistivity meter is specifically designed for medium-depth exploration. It combines a power source, transmitter up to a 200W or 800Vpp output voltage, and a 2 channels receiver in a single unit; its compactness makes it an effective tool for intensive resistivity surveys.

  • IRIS Instruments We design and manufacture geophysical ...

    IRIS Instruments is pleased to introduce its new Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity pseudo section and data quality control

  • IRIS Instruments presentation in 2012 AGU Fall Meeting ...

    Oct 13, 2017  Applied Geophysics in the Global Marketplace II 2012 AGU Fall Meeting. ... IRIS Instruments presentation in 2012 AGU Fall Meeting ... Syscal Pro for soil contamination study by IRD.

  • 作者: IRIS Instruments
  • Syscal Junior - Electrical Resistivity Geophysical Land ...

    Syscal Junior console (image Courtesy of Iris Instruments) The output current is automatically adjusted (automatic ranging) to optimise the input voltage values and ensure the best measurement quality. The system is designed to automatically perform pre-defined sets of resistivity

  • Syscal WiConnect Resistivity Land Geophysical Products

    Electre Pro from Iris Instruments. Advanced sequencing software for Syscal Pro and Elrec Pro Resistivity and Induced Polarisation meters. Create 2D 3D electrode measurement sequences in x,y and z plane. View Product

  • Syscal Multi-Tx - Electrical Resistivity Geophysical Land ...

    Syscal Multi-Tx resistivity and IP meter. Image courtesy of Iris Instruments. The Syscal Multi-Tx resistivity and induced polarisation meter is one of the latest developments by Iris Instruments. It features three 250W transmitters and 6 reception channels to reduce the acquisition time.

  • SYSCAL R1 PLUS – SGS – Subsurface Geophysical Solutions

    SYSCAL R1 Plus. The Syscal R1 plus is designed for medium depth applications, featuring a powerful transmitter and 2 measuring channels in a compact design. ... Iris Instruments proposes different standard heavy-duty multi-core cables (5 traces – 10m, 10 traces – 5m and 10 traces – 10m). ... Measurement sequences can be configured through ...

  • IRIS INSTRUMENTS

    IRIS INSTRUMENTS SYSCAL Pro "deep marine" 10 CHANNELS MARINE RESISTIVITY SYSTEM 50 A OUTPUT CURRENT • 10 simultaneous reception channels • 50 A – 2800 W – 56 V • GPS input • Internal or external (computer) storage SYSCAL Pro "deep marine": This version has been specifically designed for marine survey in high conductive medium (like salt water)

  • IRIS INSTRUMENTS

    IRIS INSTRUMENTS SYSCAL R2 RESISTIVITY AND IP SYSTEM FOR SOUNDING AND PROFILING ACQUISITION • Powerful system • 800 V – 2.5 A • Easy to use / Accurate The SYSCAL R2 unit is a high-power system designed for DC electrical surveys applied to groundwater exploration,

  • Syscal Kid Electrical Resistivity Imagaing Meter Terramar

    Syscal Kid Specifically designed for very shallow, high resolution resistivity and induced polarization sounding and profiling, the Kid is the most compact of the Syscal range whilst retaining the well-known reliability and measurement accuracy of its counter parts.

  • Electrical Resistivity Eletre Pro Geophysical Software

    Electre Pro is an intuitive software package for creating sophisticated quadrupole sequence files which can be uploaded to the Syscal Pro or Elrec Pro Resistivity and Induced Polarisation meters. Complex 2D 3D array geometries can be established quickly and verified prior to committing to data acquisition.

  • Iris Instruments IRIS Instruments

    IRIS Instruments is pleased to introduce its new Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity pseudo section and data quality control

  • Syscal Deep Marine Electrical Resistivity Imaging Meter ...

    In fresh water environment, the standard Syscal Pro can be used for marine resistivity profiling. However, in highly conductive environment, a modified variant with higher current output is required. Thanks to its 10 reception channels, the Syscal Pro Deep Marine allows simultaneous collection of 10 resistivity data points corresponding to 10 ...

  • IRIS INSTRUMENTS

    IRIS INSTRUMENTS SYSCAL Pro "deep marine" 10 CHANNELS MARINE RESISTIVITY SYSTEM 50 A OUTPUT CURRENT • 10 simultaneous reception channels • 50 A – 2800 W – 56 V • GPS input • Internal or external (computer) storage SYSCAL Pro "deep marine": This version has been specifically designed for marine survey in high conductive medium (like salt water)

  • Electrical Resistivity Syscal Pro Deep Geophysical Marine ...

    Syscal Pro Deep Marine from Iris Instruments. In fresh water environments the standard Syscal Pro can be used for marine resistivity profiling however in highly conductive environments the instruments a modified variant with higher current output is required.

  • Syscal Deep Marine Electrical Resistivity Imaging Meter ...

    In fresh water environment, the standard Syscal Pro can be used for marine resistivity profiling. However, in highly conductive environment, a modified variant with higher current output is required. Thanks to its 10 reception channels, the Syscal Pro Deep Marine allows simultaneous collection of 10 resistivity data points corresponding to 10 ...

  • IRIS instruments – Syscal R2 GECO-DMC Geophysical ...

    May 30, 2017  IRIS instruments – Syscal R1 Plus 30 May 2017. 1. The geo-resistivity meter Syscal R2 unit is a high-power system designed for DC electrical surveys applied to groundwater exploration, environmental studies, civil engineering, structural geology investigation and mineral exploration. ... It can be used with an external Switch Pro box. It can ...

  • Iris Instruments IRIS Instruments

    IRIS Instruments is pleased to introduce its new Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity pseudo section and data quality control

  • Syscal Pro Resistivity Meter Hazzazi-sa

    The Syscal Pro is an all-in-one multinode resistivity and induce polarization sounding and profiling system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250 W internal transmitter which make it the more powerful system of the Syscal range.

  • Soil Resistivity Testers - Pacific Test

    \n \n ; Pulse duration: 1s, 2s\n \n ; Channels:1 channel\n \n ; Input Impedance: 22 MOhms \n ; Input Voltage: 15V, automatic gain, input protection 200V

  • Iris Instruments - Syscal Pro, 10 ch, 2000Vpp, 250W

    Iris Instruments - Syscal Pro, 10 ch, 2000Vpp, 250W Download Data Sheet The Syscal Pro is an all-in-one multinode resistivity and induce polarization sounding and profiling system for environmental and engineering geophysical studies.

  • WennerSequence - YouTube

    Sep 18, 2015  Creating a simple Wenner array resistivity profile in Electre Pro software for the Syscal Pro.

  • 作者: Geomatrix Earth Science
  • SYSCAL Junior - Geostudi Astier

    IRIS INSTRUMENTS SYSCAL Junior . IRIS Instruments 1 avenue Buffon, B.P. 16007, 45060 Orléans Cedex 2, France Phone: + 33 (0) 2 38 63 81 00 - Fax: + 33 (0) 2 38 63 81 82 - E-mail: [email protected] - Web site: iris-instruments. RESISTIVITY METER

  • syscal switch IRIS Instruments

    IRIS Instruments is pleased to introduce its new . Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity pseudo section and data quality control – Data storage in Syscal and field computer

  • Electrical resistivity tomography (ERT) data for clay ...

    Geophysics-2D Electrical resistivity tomography: Type of data: Figure and Binary (.bin) files: How data were acquired: The 2 ERT data were acquired using Syscal Pro Resistivity Meter with 48 electrodes by IRIS Instruments. Data format: Raw. Parameters for data collection: The Dipole-Dipole array was utilized with electrode separations of 10 m.

  • SYSCAL PRO Switch graphic IRIS Instruments

    Apr 17, 2012  IRIS Instruments is pleased to introduce its new . Syscal Pro Switch resistivity imaging equipment with large graphic screen – Real time display of apparent resistivity

  • Iris Instruments - Syscal Kid 1 ch, 400Vpp, 25W

    Iris Instruments - Syscal Kid 1 ch, 400Vpp, 25W Download Data Sheet Specifically designed for very shallow, high resolution resistivity and induced polarization sounding and profiling, the Kid is the most compact of the Syscal range whilst retaining the well-known reliability and measurement accuracy of

  • * *

    The materials of processing: *

    • Granite
    • Limestone
    • Basalt
    • Pebble
    • Gravel
    • Gypsum
    • Marble
    • Barite
    • Quartz
    • Dolomite
    • Gold Ore
    • Copper ore
    * *

    About US

    we in the more than 30 years of its development process, has formed a unique and content-rich corporate culture. The building of enterprise culture, particularly the aggregation of cohesion and solidarity, is built as power source for the sustainable development of enterprise.

    Copyright © 2004-2019 We All rights reservedsitemap