If you have any questions, please contact this email[email protected]

MORE PRODUCTS

  • 2020 Asphalt Paving Cost Driveway Paving Per Square

    Asphalt Driveway Paving Cost. Paving an asphalt driveway costs $4,602 on average, with a typical range between $2,861 and $6,358.This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.Although driveways are the most common use of asphalt in the home ...

  • What Is an Asphalt Overlay and How Much Does it Cost?

    The cost of an asphalt overlay for a driveway averages between $2 and $3 per square foot. Total costs average between $2,000 and $3,800; The cost of an asphalt overlay for a standard, 50,000 square foot parking lot averages between $1.25 and $1.70 per square foot for a 1.5" to 2" thick overlay; Remember that just because the prices are lower ...

  • 2020 Asphalt Milling Cost Recycled Asphalt Cost

    Asphalt Millings Cost Per Ton. Recycled asphalt is typically sold by the ton. One ton of asphalt millings covers 80 square feet at a few inches thick.A ton costs between $7 and $60, depending on the amount of recycled asphalt pavement in the mixture.The fewer recycled materials the

  • 2020 Average Asphalt Paving Cost (with Price Factors)

    Parking lots. California Asphalt Professionals uses the same asphalt mix and preparation for commercial parking lots and residential driveways at a cost of $5 per square foot, which includes removal of existing paving and preparing the surface. Striping costs extra, and this pricing is based on the number of parking stalls, how much paint and how much signage, such as for spots reserved for ...

  • SealantSealing an asphalt surface is recommended to extend its life. After the asphalt is laid, it’s necessary to wait at least six months for it to fully...ResurfacingProfessionally installed, well-maintained asphalt surfaces can last 20 years before they require repair or resurfacing. The ground below the surfac...Sports courtsProfessionals can lay asphalt as a base for an athletic court. Costs are typically higher than for standard asphalt, depending on the type of court...Tennis courtCalifornia Asphalt Professionals has installed many tennis courts and typically charges $5.50 per square foot for the asphalt and surface preparat...Basketball courtFull basketball courts are quite large— 94x50 feet according to the National Basketball Association—most homeowners opt for a half court and goal...
  • What Is an Asphalt Overlay and How Much Does it Cost

    What Is an Asphalt Overlay and How Much Does it Cost. The price of asphalt overlays varies based on how much work needs to be done and how much area you need covered Typically the larger the surface area the lower the cost per square foot The cost of an asphalt overlay for a driveway averages between 2 and 3 per square foot Total costs average between 2000 and 3800

  • Mill-and-overlay vs. other pavement preservation methods ...

    Laipple says the goal of using pavement preservation techniques rather than wholesale mill and overlay (or mill-and-fill) is to keep the pavement's life-cycle cost low while maintaining serviceability and user satisfaction. Without some form of preventive maintenance program, it's not uncommon for an asphalt pavement to need complete reconstruction after 20 to 30 years.

  • How Much Does Asphalt Resurfacing Cost?

    How much does asphalt resurfacing cost? Depending on the company performing the job, the size of the job and geographical location, the costs for asphalt resurfacing will usually range around $1.50 to $3.50 per square foot. For example, a typical driveway which measures 750 square feet could cost $1,125 to $2,625 to resurface. Most quotes are fairly straightforward, and it can be easy to get ...

  • Cost to Install an Asphalt Driveway - 2020 Price Guide

    The cost of asphalt ranges from $3 to $5 per square foot, including labor. It is easier to get a better idea of the total cost when you calculate it in tonnes, however, and that is how these calculations will be carried out. The average price of good quality asphalt is $85 to $150 per ton. Asphalt pricing fluctuates with the price of oil.

  • MILLING AND RECYCLING - ROADTEC, INC.

    Total Cost per Square Yard $ 0.37 Total Cost per Ton $ 3.56 Operating Cost per Hour $345.00 Production Rate (sq yd/hr) 700 Production Rate (ton/hr) 110 Total Cost per Square Yard $ 0.49 Total Cost per Ton $ 3.14 Operating Cost per Hour $390.00 Production Rate (sq yd/hr) 600

  • APPENDIX L – PLANNING LEVEL COST ESTIMATES

    HIGH: 51.60 per LF Full-Depth Asphalt Pavement (SI-06) Full depth asphalt pavement is assumed to be 2” of surface course, 4” of intermediate course, 6” of base course, and 8” of aggregate – per the 2017 Fairfax County Unit Price Schedule, these cost $13.03, $24.60, $38.70, and $24.30 per square yard, a total of $100.63 per square yard.

  • 2015 PMP Mill Overlay Bid Tabulation

    Milling (Total Width Cut) 4” S.Y. 20460 $3.80 $77,748.00 $4.00 $81,840.00 7 Macrotexturing S.Y. 56450 $1.00 $56,450.00 $1.70 $95,965.00 8

  • Asphalt Milling and Paving Asphalt ... - Sure Seal

    Asphalt milling and paving is a process used in extreme cases where the pavement is plagued by severe internal and external damage that requires more extensive inspection and work as opposed to a simple quick fix. If there is a great deal of cracking and erosion or even water damage to the asphalt, it is a good idea to go below the surface and fix the problem from the inside out.

  • Factors To Consider in the Price of Paving For Your Lot

    Factors To Consider in the Price of Paving For Your Lot. The price of paving a parking lot varies from one market to another. For a 50,000 square feet parking lot in Atlanta, the cost averages between $1.25 and $1.5 per square foot – this price applies to 1 ½ to 2 inch compacted overlays.

  • How to convert asphalt pavement square yards to tons -

    1. convert area into a volume by multiplying area by the thickness. 2. Determine the density of the hot mix asphalt from the laboratory mix design. Generally, about 2,245 kg/m3 or 140 lbs/ft3. 3. Divide density of hot mix asphalt by volume to get ...

  • Calculate the Cost of an Asphalt Driveway: Materials ...

    2” base layer of asphalt: $1,755 / $1.17 per square foot; 1”-1.25” top layer of asphalt: $1,320 / $0.88 per square foot; Seal coating: $750 / $0.50 per square foot (paid for and scheduled for 10 months later) Total Asphalt Driveway Cost: $7,220 or $4.81 per square foot

  • 5 Important Factors of an Asphalt Overlay - Wolf Paving

    5 Important Factors of an Asphalt Overlay. Posted by J. Mrugacz on Jun 17, 2014 {count-facebook} {count-twitter} {count-googlePlus} {count-linkedin} Asphalt overlays make up a significant portion roadway paving work done today. The surface preparation for an overlay project is dependent on the condition, type, and elevation of the existing pavement. The pavement should be structurally intact ...

  • asphalt paving costs- what is the price per square yard ...

    asphalt paving costs- what is the price per square yard for material and labor I have a driveway with a steep grade that is 50 feet long ending in a pad area that totals 245 square yards.

  • Recycled Asphalt/Asphalt Millings + Crushed Concrete ...

    Recycled Asphalt Cost (Also Known as Asphalt Millings) Average cost for single car driveway (low and high): $30-$255; Average cost for double car driveway (low and high): $60-$511; Average cost for long double car driveway (low and high): $75-$639; Other Important Information Regarding Cost: The cost is typically between $7-$15 per ton depending on recycling company and percentage of recycled ...

  • 2020 Asphalt Paving Cost Asphalt Driveway Cost

    To estimate what your costs will be, you should first determine the area of the driveway or parking lot. That will tell you how many square feet that you'll need to pave and how much asphalt will be needed. Asphalt cost per square foot: $2-$4. Asphalt cost per ton: $90-$150

  • How to Determine Quantities - National Asphalt

    Measuring a Pavement Job. To determine the amount of asphalt you will need for a paving job you first need to know the area to be paved. This may be simple if the area to be paved is square, rectangular or constant width of road. However, this is seldom the case since there may be bump-outs or islands in the area to be paved, the width of the road may vary, or there are culs-de-sac. This may ...

  • average price for asphalt overlay parking lot per square

    to be 67.7, while the City's alleys average PCI rating was 39.0. ... The required pavement budgets are based on pavement construction costs ... for Roads and Parking Lots Pavement Condition Index Surveys' pavement ..... overlay is roughly $5 per inch per square yard. ... Asphalt Overlay - $5.65 per SqYd ..... Parking Lot. More details » Get Price

  • Cost Per Square For Of Asphalt Milling

    The cost of an asphalt overlay for a standard, 50,000 square foot parking lot averages between $1.25 and $1.70 per square foot for a 1.5" to 2" thick overlay; Remember that just because the prices are lower for an asphalt overlay doesn't mean that it is the best decision. If your asphalt is severely damaged it will need to be replaced, whether

  • SECTION 607 MILLING ASPHALT PAVEMENT - NCDOT

    30 SECTION 607 31 MILLING ASPHALT PAVEMENT 32 607-1 DESCRIPTION 33 Perform the work covered by this section including, but not limited to, milling and re-milling 34 the pavement at locations, depths, widths and typical sections indicated in the contract; 35 cleaning the milled surface; loading, hauling and stockpiling the milled material for use in 36 recycled asphalt mixtures; and disposal of ...

  • How to Estimate the Cost of Asphalt Paving of Streets ...

    The “How to Estimate the Cost of Asphalt Paving of Streets” technical paper was published in the June 2012 issue of “Estimating Today” produced by the American Society of Professional Estimators (ASPE). ASPE serves construction estimators by providing education,

  • What Is The Average Cost Of Asphalt Millings

    Asphalt paving costs what is the price per square yard for material and labor i have a driveway with a steep grade that is 50 feet long ending in a pad area that totals 245 square yards. Detail; Average cost per square yard for milling and overlay

  • What is the average asphalt paving cost - Answers

    The average cost for 2" asphalt installed is $ 1.80 sf It really can vary, a lot of times excavation must be done and also road base needs to be laid down. You're looking at a bill ranging from ...

  • Recycled Asphalt Cost - Tropical Asphalt

    As per the findings of Asphaltrecycling, recycled asphalt is a huge cost saver for the local government. The savings amount to $30-$80 a ton. Contractors and municipalities recycle asphalt at $18/ton using a PT-PRO series Recycler. A hot mix costs $78/ton. Therefore, the saving is phenomenal at $60/ton. Hence, if a person uses 50 tons of asphalt for 30 days, he could save up to $90,000 ...

  • Recycled Asphalt Cost - Tropical Asphalt

    As per the findings of Asphaltrecycling, recycled asphalt is a huge cost saver for the local government. The savings amount to $30-$80 a ton. Contractors and municipalities recycle asphalt at $18/ton using a PT-PRO series Recycler. A hot mix costs $78/ton. Therefore, the saving is phenomenal at $60/ton. Hence, if a person uses 50 tons of asphalt for 30 days, he could save up to $90,000 ...

  • 2020 Asphalt Driveway Cost Guide (Install, Resurface,

    Asphalt Driveway Cost. Even though it is marginally more common to see asphalt driveways in the more northern regions of the United States and concrete in the southern states, there is a pretty even split across the country between concrete and asphalt for residential driveways. In the United States, the average cost for a 20 x 24-foot-long (480 sq. ft/53 sq. yd.) two-car, asphalt driveway ...

  • Average Cost of Asphalt Paving Road Star Paving

    The cost of an asphalt project averages between $2,800 and $6,300, with homeowners, typically spending an average of $4,500 to install a driveway. The total square footage needing paved, obviously, plays a significant role in deciding cost, but there are other factors as well. Roadstar Paving, a trusted provider of high-quality asphalt paving in the Pittsburgh area, outlines some of the ...

  • How To Quickly Figure The Cost Of An Asphalt Driveway ...

    25.10.2016  On average, most asphalt paving contractors charge about $3 to$4 a square foot for an installed asphalt driveway. Multiply the square footage by 3 and 4. This will give you a ballpark number as to ...

  • 作者: Izzy Saucedo
  • Existing Surface Preparation for Overlays - Pavement ...

    Overlays (either structural or non-structural) make up a large portion of the roadway paving done today.The degree of surface preparation for an overlay is dependent on the condition and type of the existing pavement. Generally, the existing pavement should be structurally sound, level, clean and capable of bonding to the overlay.

  • Tips for Using asphalt millings for driveways and parking ...

    26.09.2018  In this video we share tips on constructing driveways and parking lots with re-juvenated asphalt millings and how to stop the two most common problems which ...

  • 作者: Hawk Seale Distributing 2018
  • What's The Average Cost To Pave A Parking Lot In South

    The average cost to pave an asphalt parking lot in South Jersey varies from market to market and is contingent on several factors listed below. The average cost in the South Jersey Market for a 50,000 sq ft parking lot ranges in price from $1.25 - $1.50 per square foot for a 1 ½” – 2” compacted overlay.

  • Prices for Asphalt Paving Service - Beiler Bros Asphalt, LLC

    115 is the number of compacted pounds per inch in a square yard of asphalt. Divide by 2000. 2000 is the number of pounds in a ton. This is how many tons you will need for your driveway. 2017 Asphalt Prices. 25mm binder – $36-$48 per ton. $878 – $1171 per truck load; 19mm modified binder $40-$52 per ton. $976 – $1268 per truck load; 9.5mm id-2 wearing $44-$68 per ton. $1073 – $1658 per ...

  • DESIGN AND CONSTRUCTION GUIDELINES FOR FULL DEPTH ...

    3.3 Pavement Design Overlay A 4 in. minimum, two-course asphalt concrete overlay is recommended: • 2 ½ in. (25 mm) binder, • 1 ½ in. (9.5mm) top Consult with the Regional Materials Engineer for the appropriate overlay materials. It is recommended that, for a hot mix surface, a polymer modified asphalt binder material be

  • Milling And Filling Asphalt Road Cost Per Foot

    Cost of asphalt pavement per cubic foot - Mining. Apr 14, 2013 Crusher and Mill cost of asphalt pavement per cubic foot; , tons of asphalt milling plant per sq yard , How much does asphalt cost per square foot? Chat Now; what is the average cost of building per square metre in , Get Price; Price Milling Of Asphalt Greenrevolution.org. Price Milling Of Asphalt; Price Milling Of ...

  • * *

    The materials of processing: *

    • Granite
    • Limestone
    • Basalt
    • Pebble
    • Gravel
    • Gypsum
    • Marble
    • Barite
    • Quartz
    • Dolomite
    • Gold Ore
    • Copper ore
    * *

    About US

    we in the more than 30 years of its development process, has formed a unique and content-rich corporate culture. The building of enterprise culture, particularly the aggregation of cohesion and solidarity, is built as power source for the sustainable development of enterprise.

    Copyright © 2004-2019 We All rights reservedsitemap