If you have any questions, please contact this email[email protected]

MORE PRODUCTS

  • Ni-Hard - Nickel Institute

    hardness of Ni-Hard 1 in the as-cast condition at various silicon levels 7 A vertical pug with a Ni-Hard spiral knife and mould Table 1 • Compositions of the Ni-Hard irons Grade Chemical composition (weight %) C (total) Si Mn S P Ni Cr Mo* Ni-Hard 1 3.0-3.6

  • Ni Hard ( Wear resistant ) - MEIN

    Properties Ni Hard ( Wear resistant ) Name NI -HARD 1 NI -HARD 2 NI -HARD 3 NI -HARD 4 Basic chemical composition C Si Mn S P Ni Cr Mo 0,3-0,5 0,3-0,5 0,4-0,7

  • 文件大小: 118KB
  • Wear-resistant Steels and Castings

    GX 150 Mn Cr 18-3 Basic chemical composition 1,20 1,00 1,30 1,20 1,20 1,50 %C %Mn %Ni %Cr %Mo 12,00 12,00 13,00 12,00 8 19 2,00 1 3 1,00 1 Properties R>70 Kg/mm2 R>70 Kg/mm2 ASTM A532 CL II E ASTM A532 CL II A ASTM A532 CL I A, B, C ASTM A532 CL I D ASTM A-532-CL III A Equivalents >60 HRc >62 HRc >45 HRc >58 HRc >58 HRc >54 HRc >58 HRc >55 HRc 0,25 <=2,00 Wear-resistant

  • 文件大小: 269KB
  • HIGH CHROME NIHARD CASTINGS Sr. SPECI Chemical ...

    HIGH CHROME NIHARD CASTINGS Sr. NO-SPECI FICATIO N Chemical Composition C. Mn. Cr. Ni. Mo. Max. Si. P Max. S. Max. 1. IS4771 Type-2 2.4/ 3-6 0.4-0.9 14/ 18

  • Ni-Hard - Abrasion Resisting White Irons - BS 4844 1986 ...

    The Boro' Foundry Ltd. Stourvale Road, Lye, Stourbridge, West Midlands DY9 8PR Telephone: +44 (0)1384 422277 Fax: +44 (0)1384 424836

  • EN 1.4837 (GX40CrNiSi25-12) Cast Stainless Steel ...

    Among cast stainless steels, the composition of EN 1.4837 stainless steel is notable for containing comparatively high amounts of silicon (Si) and chromium (Cr). Silicon content is typically governed by metallurgical processing concerns, but it can also be added for the purpose of improving oxidation resistance. Chromium is the defining alloying element of stainless steel. Higher chromium ...

  • STAINLESS STEEL LIST OF EQUIVALENCES - Irestal

    STAINLESS STEEL LIST OF EQUIVALENCES APROXIMATE EQUIVALENCES LIST OF NORMS FOR STAINLESS STEEL GRADES. irestal IG 01/www X 12 CrMnNIN 17-7-5 X 10 CrNi 18-8 X 8 CrNiS 18-9 X 5 CrNi 18-10 X 2 CrNi 18-9 X 2 CrNi 19-11 X 15 CrNiSi 20-12 X 12 CrNi 23-13 X 8 CrNi 25-21 X 5 CrNiMo 17-12-2 X 3 CrNiMo 17-13-3 X 2 CrNiMo 17-12-2 X 2 CrNiMo 18-14-3 X 2 CrNiMo 17

  • 文件大小: 355KB
  • NiHard 4 - wilfley

    Chemical Composition C Carbon Mn Manganese Si Silicon P Phosphorus S Sulfur Cr Chromium Ni Nickel Mo Molybdenum Fe Iron 2.5 - 3.6 2.0 max. 2.0 max. 0.1 max. 0.15 max. 7.0 - 11.0 4.5 - 7.0 1.5 max. Balance Average Hardness 300 HBN 800 HBN White Iron MAXALLOY ® 5 MAXALLOY ® 2 MAXALLOY ® 5A NiHard 4

  • 文件大小: 71KB
  • Properties and Applications of Ni-Resist and Ductile Ni ...

    Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys General Characteristics of the Ni-Resist Austenitic Cast Iron Alloys There are two families of Ni-Resist austenitic cast irons. These are the standard or flake graphite alloys and the ductile or spheroidal graphite alloys. As time passes, the spheroidal grades, because of higher strength, ductility and elevated temperature ...

  • 文件大小: 931KB
  • MICROSTRUCTURE: As Cast MICROSTRUCTURE: Cryo Treated

    By virtue of its alloy content, Ni-Hard in the mold-cooled condition possesses a matrix structure that . is akin to heat treated white iron. It also contains a multitude of refined carbides which make an important contribution to its abrasion resistance. The high chromium level and near eutectic composition of Ni-Hard 4 results in very hard, discontinuous carbides of the (Cr,Fe)7C3 type with ...

  • GMX: E-Mail-Adresse, FreeMail, De-Mail Nachrichten

    Portal des FreeMail-Pioniers mit Nachrichten und vielen Services. Kostenlos mit GMX FreeMail: E-Mail-Adresse, 1 GB Mail Speicher, Free SMS.

  • GX4CrNiCuNb16-4 steel

    This page cover the GX4CrNiCuNb16-4 chemical element, Mechanical Properties, GX4CrNiCuNb16-4 Datasheet, Cross Reference of GX4CrNiCuNb16-4 steel, Mainly used for .

  • Metal Alloy Elemental Composition Search - MatWeb

    Metal Alloy Composition Search by constituent element chemistry leads to property data for ferrous (stainless steel, cast iron, tool steel, alloy steel) and nonferrous metals (beryllium, nickel, copper, aluminum, ytitanium), superalloys including Inconel, Invar and Nimonic alloys, and other engineering materials.

  • Alloy steel - Wikipedia

    Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties.Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.

  • CHAPTER 11: METAL ALLOYS APPLICATIONS AND PROCESSING

    (a) absence of grain boundaries – easy magnetized materials (b) extremely fine structure – exceptional strength and toughness Compositions (wt. %) B Si Cr Ni Mo P 20 10 28 6 10 6 40 6 14 •Some Amorphous Ferrous Alloys

  • Stainless Steel - Grade 316L (UNS S31603) - Material

    Stainless Steel - Grade 316L - Properties, Fabrication and Applications (UNS S31603) Download PDF Copy; Request Quote; Written by AZoM Feb 18 2004. Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to ...

  • Werkstoffübersicht nach Werkstoffnummer (W.-Nr.) DIN (DE ...

    1.0445 h iv 1.1.2 28–29 1.0461 ste 255 1.1.4 28–29 1.0482 19 mn 5 1.3.2 28–29 1.0501 c 35 1.2.2 28–29 1.0503 c 45 1.2.2 28–29 1.0528 c 30 1.2.2 28–29 1.0531 st 50 1.1.1 28–29 1.0552 gs-52 1.1.3 28–29 w-nr. din (de) mat 1.0558 gs-60 1.1.3 28–29 1.0570 st 52-3 1.1.1 28–29 1.0582 ste 355 1.1.4 28–29 1.0710 15 s 10 1.2.3 28–29 1.0715 9 smn 28 1.2.3 28–29 1.0718 9 smnpb 28

  • Material Data Sheet 1.4301, 304, S 30400 :: M. Woite GmbH

    Material No. 1.4301: EN symbol (short) X5CrNi18-10: AISI/SAE: 304: UNS: S 30400: AFNOR: Z7CN 18-09 : B.S. 304 S15 – 304 S31: alloy — Registered work's label — Standards: EN 10088-3: Description. The stainless austenitic chromium-nickel steel 1.4301 shows good corrosion resistance (particularly in natural environmental media and in the absence of considerable chlorine and salt ...

  • 1/8-hard AISI 304L vs. EN 1.4823 Stainless Steel ...

    Both 1/8-hard AISI 304L and EN 1.4823 stainless steel are iron alloys. They have a moderately high 90% of their average alloy composition in common. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. For each property being compared, the top bar is 1/8-hard AISI 304L and the bottom bar is EN 1.4823 ...

  • Nickel Alloys - Rolled Alloys, Inc.

    Alloy 718 (AMS 5663) is bar that is already aged (precipitation hardened). As supplied, this material provides high tensile strength and hardness compared to 718 in the annealed condition. Alloy X. Inventory. Plate; Round Bar; Sheet; and more... Product Details . Alloy X - Good strength and ease of fabrication, with excellent oxidation resistance through 2000°F. Widely used for aircraft ...

  • Stainless steel grade chart - Atlas Steels

    Stainless steel grade chart ATLAS STEELS – SPECIALTY STEELS PRODUCT REFERENCE MANUAL SECTION 9: APPENDICES Printed November 2000 1 S9 Chemical analysis (%) specified Grade UNS No. C Si Mn P S Cr Mo Ni Other 253MA S30815 0.05 1.1 - 2.0 0.8 0.040 0.030 20.0 - 22.0 10.0 - 12.0 N 0.14-0.20-0.10 Ce 0.03-0.08

  • NITRONIC 50 (XM-19) High Strength 22-13-5 Marine

    NITRONIC 50 (XM-19) (UNS S20910) Click for High Strength NITRONIC® 50 Click for NITRONIC® 50W (UNS S20980) Weld Wire. Cr 22, Ni 12.5, Mn 5, Mo 2.25, Si 1 C 0.06 Fe bal. High Performance Alloys stocks and produces this grade in the following forms: Bar, hex bar, wire spool. wire cuts, loose coil, wire reel, sheet, plate, pipe, fastener, disk, forged, slab, billet, ingot. Request quote on this ...

  • 3/4-hard AISI 302 vs. EN 1.4849 Stainless Steel ...

    Both 3/4-hard AISI 302 and EN 1.4849 stainless steel are iron alloys. They have 67% of their average alloy composition in common. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. For each property being compared, the top bar is 3/4-hard AISI 302 and the bottom bar is EN 1.4849 stainless steel. 3/4 ...

  • Chrom – Wikipedia

    Chrom (altgriechisch χρῶμα chrṓma, deutsch ‚Farbe‘) ist ein chemisches Element mit dem Elementsymbol Cr und der Ordnungszahl 24. Es zählt zu den Übergangsmetallen, im Periodensystem steht es in der 6. Nebengruppe (6. IUPAC-Gruppe) oder Chromgruppe.Die Verbindungen von Chrom haben viele verschiedene Farben und werden oft als Pigmente in Farben und Lacken verwendet.

  • Edelstahl – Wikipedia

    Ein austenitischer 18/10 Cr-Ni-Stahl, der zur Verbesserung der Zerspanbarkeit mit Schwefel legiert ist, so dass eine Bearbeitung auf Automaten möglich ist (Automatenstahl). Durch den höheren Schwefelgehalt wird die Korrosionsbeständigkeit herabgesetzt. Sie ist besser als beim Werkstoff 1.4104 und entspricht etwa der von Werkstoff 1.4016. Für Kaltumformung ist diese Qualität nicht geeignet ...

  • Aluminum and Aluminum Alloys - Materials Data Repository

    Composition limits for these alloys can be found in the ... Aluminum and Aluminum Alloys / 355 Table 2 Strength ranges of various wrought aluminum alloys Aluminum Type of Tensile Association alloy Strengthening strength range series composition method MPa ksi 1xxx Al Cold work 70–175 10–25 2xxx Al-Cu-Mg Heat treat 170–310 25–45 (1–2.5% Cu) 2xxx Al-Cu-Mg-Si Heat treat 380–520 55 ...

  • SteelNumber - EN 10027 - Designation systems for steels

    Steel Classification according to EN 10027-2. Designation systems for steels. You can compare the properties of steels after choosing the number . 1.0XXX: Non-alloy steels : Number = 1.00XX Base steels: Number = 1.01XX Quality steel (General structural steels with Rm < 500 MPa ) Number = 1.02XX Other structural steels (Not intended for heat treatment with Rm < 500 MPa ) Number = 1.03XX Steels ...

  • What Is Brass? Composition and Properties

    Common names for brass alloys may be misleading, so the Unified Numbering System for metals and alloys is the best way to know the composition of the metal and predict its applications. The letter C indicates brass is a copper alloy. The letter is followed by five digits. Wrought brasses — which are suitable for mechanical forming — begin with 1 through 7.

  • Find Materials Suppliers - Matmatch

    Matmatch makes your search efficient and helps you find the best suppliers. So, whether you need a quote for Inconel 718 bar, 6063 T6 aluminium profile, copper pipe or titanium sheet, we help you to find exactly what you are looking for.

  • Cr-Ni system austenitic heat-resisting steel - Nippon ...

    13.07.1976  Cr-Ni system austenitic heat-resisting steel exhibiting higher heat resistance than that of well-known austenitic stainless steels by means of which an atomic ratio of C being 0.05 to 0.30% to Ti being 0.01 to 0.8% and/or Nb (Ta) being 0.01 to 1.6% is within the range of 1.3 to 7, preferably 3 to 6 and the grain size is within the range of ASTM No. 3 to 8.

  • Material Properties of EPDM, NBR, and FPM Rubber

    The material is particularly heat-resistant and resistant to oil, solvents and strong acids. However, the FPM seal has only limited resistance to e.g. butyl acetate, acetone and methyl alcohol. Load Ratings. Load ratings are based upon maximum anticipated traffic, in accordance with American National Standards ASME A112.21.1M. Light Duty (LD) - Safe Live Load Under 2000 lbs. Medium Duty (MD ...

  • Welcome to PolyOne Specialty Polymer Formulations

    PolyOne is here help you meet and beat your challenges with complex material science, so your next breakthrough can rock the market.

  • External Memory Interface (EMIF) Spec Estimator

    EMIF Spec Estimator The External Memory Interface Spec Estimator—a parametric tool—allows you to find and compare the performance of the supported external memory interfaces in Intel® FPGAs. You’ll have the ability to filter down to specific performances based on your targeted specifications, and then compare performances across FPGAs side-by-side by filtering through the criteria you ...

  • NITRONIC 60 (Alloy 218, UNS S21800)

    NITRONIC® 60 (Alloy 218) (UNS S21800) Click for High Strength NITRONIC® 60 Click for NITRONIC® 60W (UNS S21880) Weld Wire . NITRONIC 60 Datasheet. Cr 17, Mn 8, Ni 8.5, Si 4, N 0.13, C 0.10, Fe Bal. High Performance Alloys stocks and produces this grade in the following forms: Bar, flat bar, square bar, wire spool. wire cuts, loose coil, sheet, plate, strip, coil, tube, pipe, fastener, disk ...

  • Chapter 9: Phase Diagrams - Florida International University

    Cu-Ni system Phase Diagrams: composition of phases • Rule 2: If we know T and Co, then we know:--the composition of each phase. • Examples: TA A 35 Co 32 CL At TA = 1320°C: Only Liquid ( L) CL = C o ( = 35 wt% Ni) At TB = 1250°C: Both α and L CL = Cliquidus ( = 32 wt% Ni here) Cα = Csolidus ( = 43 wt% Ni here) At TD = 1190°C: Only Solid ( α) Cα = Co ( = 35 wt% Ni ) Co = 35 wt% Ni ...

  • Wegen Coronavirus/COVID-19: Neue Regeln für "Pokémon

    Eigentlich will "Pokémon Go" die Spieler an die frische Luft locken. Doch in Zeiten von Corona bitten die Entwickler im Haus zu bleiben. Dafür gibt es sogar Regeländerungen.

  • Honda Jazz Hybrid Jazz Crosstar Hybridfahrzeug

    Entdecken Sie die neuen Hybridmodelle Jazz und Jazz Crosstar. Effizient und dynamisch bilden sie die neue Generation der innovativen Honda Hybridfahrzeuge.

  • Billiges iPhone: Apple plant „größere“ Überraschung

    iPhone 9 und iPhone 9 Plus: Apples „größere“ Überraschung mit 5,5-Zoll-Display. Für eine eher unerwartete Wende sorgt jetzt ein Bericht der Kollegen von 9to5Mac.Die haben im „erbeuteten ...

  • SAE steel grades - Wikipedia, the free encyclopedia

    represent chemical composition standards for steel specifications. The American Iron and Steel Institute (AISI) ... % Cr % Ni % C % Mn % Si % P % S % N Other Austenitic 201 S20100 16–18 3.5–5.5 0.15 5.5–7.5 0.75 0.06 0.03 0.25 - 202 S20200 17–19 4–6 0.15 7.5–10.0 0.75 0.06 0.03 0.25 - 205 S20500 16.5–18 1–1.75 0.12–0.25 14–15.5 0.75 0.06 0.03 0.32–0.40 - 254[8] S31254 20 ...

  • Renkforce Shop » Online kaufen bei Conrad

    Conrad Electronic SE benötigt für einzelne Datennutzungen Ihre Einwilligung, um die Funktion der Website zu gewährleisten und Ihnen unter anderem Informationen zu Ihren Interessen anzuzeigen. Mit Klick auf "Zustimmen" geben Sie Ihre Einwilligung dazu. Ausführliche Informationen erhalten Sie in unserer Datenschutzerklärung.

  • * *

    The materials of processing: *

    • Granite
    • Limestone
    • Basalt
    • Pebble
    • Gravel
    • Gypsum
    • Marble
    • Barite
    • Quartz
    • Dolomite
    • Gold Ore
    • Copper ore
    * *

    About US

    we in the more than 30 years of its development process, has formed a unique and content-rich corporate culture. The building of enterprise culture, particularly the aggregation of cohesion and solidarity, is built as power source for the sustainable development of enterprise.

    Copyright © 2004-2019 We All rights reservedsitemap